POS1846 TRVC062333000 CP00000310

Description

ALSTOM POS1846 TRVC062333000 CP00000310 模块的技术参数尚未完全公开，但根据现有信息可归纳以下关键点：

---

一、已知参数

1. 品牌与型号
   • 品牌：ALSTOM（阿尔斯通）
   • 型号：POS1846
   • 配套标识：TRVC062333000、CP00000310
2. 功能定位
   • 属于驱动信号处理控制板，可能用于轨道交通或工业自动化领域。
   • 需与卡斯柯（CASCO）相关车载设备核心板卡兼容（如南宁轨道交通1号线案例）。
3. 物理特性
   • 尺寸：原厂标准（具体尺寸未公开）。
   • 货期：3-5天（全新现货）。

---

二、应用场景与兼容性

1. 轨道交通应用
   • 典型应用于列车信号系统，如车载电源安全输出板（PSO）、车载核心处理器板（CMP）等。
   • 需与卡斯柯信号系统（如TRVC062345000、TRVC062335000等）协同工作。
2. 工业自动化兼容性
   • 可与多种PLC系统及工业模块集成，如ABB、GE、本特利（Bently）等品牌设备。

---

三、技术参数推测

由于官方未公开详细技术文档，以下参数基于同类产品推测：

1. 电气参数
   • 工作电压：可能支持24VDC或120VAC（参考ALSTOM接口板模块）。
   • 功率：未公开，但同类产品通常功耗较低（如5V/50W开关电源）。
2. 通信接口
   • 可能具备CAN-BUS、以太网或专用工业总线接口（如参考Mat.-Nr.029.228500控制板）。
3. 环境适应性
   • 工作温度范围：可能为-10°C至+55°C（参考温湿度传感器TC6TRD参数）。
   • 防护等级：未公开，但轨道交通设备通常要求IP20以上。
4. 可靠性与维护
   • 质保期：1年（参考ALSTOM接口板模块）。
   • 故障率：未公开，但ALSTOM产品以高可靠性著称。

---

四、补充信息

1. 替代型号
   • 可参考ALSTOM其他控制板型号，如I/OBE2（P/N:12004-104-00 V1.0.0）、VIIB16-C（P/N:12011-105-00 V1.0.0）。
2. 采购建议
   • 联系ALSTOM官方或授权代理商获取技术白皮书。
   • 参考南宁轨道交通集团采购案例，确认兼容性及交货期。

---

五、注意事项

• 参数确认：实际参数需以ALSTOM官方技术文档为准。
• 兼容性测试：建议与卡斯柯信号系统进行联调测试，确保功能正常。
• 备件管理：轨道交通领域建议储备关键备件，避免因模块故障导致运营中断。

如需进一步技术细节，建议直接联系ALSTOM技术支持团队。

The technical parameters of the ALSTOM POS1846 TRVC06233000 CP00000310 module have not been fully disclosed, but based on the existing information, the following key points can be summarized:

1、 Known parameters
Brand and Model
Brand: ALSTOM
model: POS1846
Supporting identification: TRVC062333000、CP00000310
Functional positioning
Belonging to the driver signal processing control board, it may be used in the fields of rail transit or industrial automation.
It needs to be compatible with the core board of CASCO related on-board equipment (such as the case of Nanning Metro Line 1).
physical property
Size: Original factory standard (specific size not disclosed).
Delivery time: 3-5 days (new stock).
2、 Application scenarios and compatibility
Rail Transit Applications
Typical applications in train signal systems include on-board power supply safety output board (PSO), on-board core processor board (CMP), etc.
Need to work in coordination with Casco signal systems (such as TRVC062345000, TRVC062335000, etc.).
Industrial automation compatibility
Can be integrated with various PLC systems and industrial modules, such as ABB GE、 Bently and other brand equipment.
3、 Technical parameter speculation
Due to the lack of official disclosure of detailed technical documentation, the following parameters are estimated based on similar products:

Electrical parameters
Working voltage: may support 24VDC or 120VAC (refer to ALSTOM interface board module).
Power: undisclosed, but similar products typically have lower power consumption (such as 5V/50W switching power supplies).
communication interface
May have CAN-BUS, Ethernet, or dedicated industrial bus interfaces (as referenced in Mat. – Nr.029.228500 control board).
Environmental adaptability
Working temperature range: may be -10 ° C to+55 ° C (refer to temperature and humidity sensor TC6TRD parameters).
Protection level: undisclosed, but rail transit equipment typically requires IP20 or higher.
Reliability and Maintenance
Warranty period: 1 year (refer to ALSTOM interface board module).
Failure rate: undisclosed, but ALSTOM products are known for their high reliability.
4、 Supplementary Information
Alternative models
You can refer to other ALSTOM control board models, such as I/OBE2 (P/N: 12004-104-00 V1.0.0) and VIIB16-C (P/N: 112011-105-00 V1.0.0).
Procurement recommendations
Contact ALSTOM official or authorized agents to obtain technical white papers.
Refer to the procurement case of Nanning Rail Transit Group to confirm compatibility and delivery time.
5、 Precautions
Parameter confirmation: Actual parameters should be based on ALSTOM’s official technical documentation.
Compatibility testing: It is recommended to conduct a joint debugging test with the CASCO signal system to ensure proper functionality.
Spare parts management: It is recommended to reserve key spare parts in the field of rail transit to avoid operational interruptions caused by module failures.
For further technical details, it is recommended to contact the ALSTOM technical support team directly.